Powder Coating Equipment And Supplies

Enviro-Powder Strip 30-Gallon Drum is a production-volume non-methylene-chloride powder coat stripper for heated dip-tank chemical stripping operations. Key features: Non-methylene-chloride...

Enviro-Powder Strip 30-Gallon Drum is a production-volume non-methylene-chloride powder coat stripper for heated dip-tank chemical stripping operations. Key features: Non-methylene-chloride NMP-based formula meets EPA and OSHA workplace standardsAlkaline activator drives fast stripping of powder coat, e-coat, and paint30-gallon drum charges a medium-size strip tank with fewer reordersOperates best at 120–160°F in a heated immersion tankSafe on steel and aluminum at recommended operating...

Enviro-Powder Strip 55-Gallon Drum is a high-volume non-methylene-chloride powder coat stripper for industrial-scale heated dip-tank operations. Key features: Non-methylene-chloride NMP-based...

Enviro-Powder Strip 55-Gallon Drum is a high-volume non-methylene-chloride powder coat stripper for industrial-scale heated dip-tank operations. Key features: Non-methylene-chloride NMP-based formula meets current EPA and OSHA standardsAlkaline activator quickly strips powder coat, e-coat, and paint from metal55-gallon drum fully charges medium-to-large production strip tanksLowest per-gallon cost for high-volume shopsCompatible with stainless steel and polypropylene immersion tanksIdeal for...

Enviro-Powder Strip (5 Gallons) is a non-methylene-chloride NMP-based immersion powder coat stripper for removing cured coatings from steel and aluminum. Key features: Non-methylene-chloride formula...

Enviro-Powder Strip (5 Gallons) is a non-methylene-chloride NMP-based immersion powder coat stripper for removing cured coatings from steel and aluminum. Key features: Non-methylene-chloride formula meets current EPA and OSHA workplace rulesNMP-based chemistry with alkaline activator for fast immersion strippingSafe on aluminum at recommended concentrations without base-metal attackWorks best in heated strip tanks at 120–160°FRemoves powder coat, e-coat, and conventional paintIdeal for job...

ExpressBlast Lite is a single-component, water-soluble rust inhibitor that prevents flash rust on freshly blasted metal while simultaneously removing surface salts, chlorides, sulfates, nitrates,...

ExpressBlast Lite is a single-component, water-soluble rust inhibitor that prevents flash rust on freshly blasted metal while simultaneously removing surface salts, chlorides, sulfates, nitrates, and blast residues. Key features: Flash rust prevention: approximately 48 hours (longer with no rain and temperatures above 40°F / 4°C)Removes surface salts (chlorides, sulfates, nitrates) - generally undetectable after proper useNon-toxic, non-hazardous, and non-flammableBiodegradable, colorless, and...

The Extra Hang Rail is a direct-fit expansion component for CCS powder coat racks. Adding a hang rail increases the hanging capacity per rack load - more parts per cycle means fewer total oven runs....

The Extra Hang Rail is a direct-fit expansion component for CCS powder coat racks. Adding a hang rail increases the hanging capacity per rack load - more parts per cycle means fewer total oven runs. Key features: Compatible with CCS powder coat rack systemsAdds additional hanging points to existing rack without replacing the full rackClamp-style attachment for secure mountingMaximizes oven utilization by increasing parts per cure cycleCost-effective throughput increase without purchasing a...

Our table top strip tank is  designed to be used with any of our strippers. This tank is made for the purpose to strip powder from hooks and silicone plugs, caps etc. although it may be used...

Our table top strip tank is  designed to be used with any of our strippers. This tank is made for the purpose to strip powder from hooks and silicone plugs, caps etc. although it may be used for any small job where powder coat is to be removed.

The High Temp Castor Upgrade for Hook Storage Rack is a set of oven-safe high-temperature castor wheels for powder coat rack systems. Replaces standard castors on hook storage racks for...

The High Temp Castor Upgrade for Hook Storage Rack is a set of oven-safe high-temperature castor wheels for powder coat rack systems. Replaces standard castors on hook storage racks for oven-compatible mobility. Key features: High-temperature rated wheels withstand oven cure temperaturesStemmed steel castors for stable rolling loaded with partsBolt-on upgrade for existing Creative Coating Solutions racksRated for hook storage rack loading in production environments Ideal for production powder...

The High Temp Black Phenolic Replacement Castor Wheel is the correct heat-resistant castor for CCS powder coat racks that must roll in and out of powder coating ovens at elevated temperatures. Key...

The High Temp Black Phenolic Replacement Castor Wheel is the correct heat-resistant castor for CCS powder coat racks that must roll in and out of powder coating ovens at elevated temperatures. Key features: Tread width: 1-1/2"Heat rating: 475°F continuous / 550°F intermittentBlack phenolic material maintains structural integrity at oven temperaturesWill not soften, deform, or lose rolling function during cure cyclesSuitable for painted floors - less aggressive than steel castorsSold...

Designed for opening and closing 2" and 3/4" drum plugs. Use with a 1/2" ratchet drive. Manufactured from heat treated chrome vanadium steel for strength when using with pneumatic impact driver....

Designed for opening and closing 2" and 3/4" drum plugs. Use with a 1/2" ratchet drive. Manufactured from heat treated chrome vanadium steel for strength when using with pneumatic impact driver. Works with several 3/4" and 2" drum plugs, see illustration. Drum impact socket with a ratchet drive for ideal operationIdeal with pneumatic impact driver for maximum efficiencyFeatures durable construction for added strength and long lifeUse in industrial applications for optimal res ...