Keysco Tools

Standard Single Edge Blades

Weight 12oz, Handle 12 inches, Head 2-7/8, Face 1-9/16

Rubber Flat Bottom, 2 3/4" x 5" uses standard 3" x 8" abrasive paper this block has molded nails which secure paper on each end

Made of super-alloy, Cobalt that Includes one 1/2" cobalt series spot weld cutters They are a Patented self-centering tip design, The tip prevents walking, It is a One piece construction increases over all strength and up to 5 x faster than hold saw cutters

1", 2", 3" and 4" metal blade filler spreaders made of quality spring steel

2 - 6" Metal Blade Spreaders made of quality spring steel with a plastic upper for ease of use and comfort

Exclusive foam design prevents flexing for use on flat or curved surfaces.

Lubricate hammer mechanism of impact wrenches with grease type fittings, It has a needle nose- nozzle that fits all type of fittings. It is great for any hard to reach application.

Improved model, provides a step around damaged area so that patch fits flush

10 LB slide hammer with shaft threaded 5/8 - 18 to fit popular popular axle puller adapters

This 1/2 inch Cutter is made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires very little grinding and has a self centering point that minimizes walking It will not require a punch and is a solid one piece construction and will not break or snap.

This Kit contain all 4 cutters (1/4, 5/16, 3/8 and 1/2 inch) these Cutters are made of high speed steel (M2), used in either an pneumatic or electric drill. This bit capable of operating at speeds up to 2,000 RPM. It leaves a clean hole that requires very little grinding and has a self centering point that minimizes walking It will not require a punch and is a solid one piece construction and will not break or snap.

The Keysco Heavy Duty Push-Pull Body Mate is a compact and powerful jack set that is designed for pushes and pulls of the front end work, rails, roof bracing and bumper alignment. Its convenient universal application allows it to be used anywhere on the vehicle. All friction rod and jack parts are made of steel while all the attachments are fully plated.

Heavy duty 3/8" thick alloy plate with staggered hole pattern for easy frame bolt up, welded u-bar for unlimited pulling angles and easy hookup for your chain assemblies and the Staggered holes are 9/16 diameter

Pull panel dents safely and easily without drilling holes, The Lipped edge provides strong hold yet allows easy release of vacuum. There are no trigger to gum up or break off, This provides an easy clean job.

Indispensable when the versatility if a chain hookup is required, Aligns bumpers, panels, hoods, decks and bracket. Has heavy duty 1-1/4" diameter tubing with 2 welded hooks for strength and versatility. The 1/4" chain is 6" long with a heavy duty claw style hook. 52" long in total length

Perfectly balanced tool that removes upholstery clips in seconds

8" Long, 5/8 Hex, Tapered to 3/8 Inch Brass Punch

10" Long, 3/4 inch Diameter, Chamfered Both Ends

4-1/2 diameter cup provides powerful suction and the New lip design holds tight. This is Perfect for pulling metal panels, Capable of Handling sheet metal and plastic.

Weight 16 oz, Handle, 12 inches, Head 3-1/2 inches, Face 1-3/16 inches

Weighs 24 oz, Handle 14 inches, Head 14 inches, Face 2-1/8 inches