Skip to main content
Products 1-24 of 32
Show
Availability: In Stock
Item #: ST5007 -

1/2" Heavy Duty Reversible Drill

Price: $227.85

One hand quick reverse leverErgonomic design with elastomer handle grip for improved comfortHeavy duty ball and needle bearing constructionPlanetary gear reduction balances the drilling load and...

One hand quick reverse leverErgonomic design with elastomer handle grip for improved comfortHeavy duty ball and needle bearing constructionPlanetary gear reduction balances the drilling load and maximizes performancePrecision air motor with exceptionally high turning force

Availability: In Stock
Item #: VT3000A -

1/4" Angle Air Die Grinder

Price: $138.10

All ball bearing construction for longer tool lifeSelf-locking safety throttle lever to prevent accidental startsErgonomic positive gripRear exhaust

All ball bearing construction for longer tool lifeSelf-locking safety throttle lever to prevent accidental startsErgonomic positive gripRear exhaust

Availability: In Stock
Item #: VT3001A -

1/4" Gearless Angle Die Grinder

Price: $150.70

Availability: In Stock
Item #: VT4505 -

1" Air Belt Sander

Price: $643.07

Rear exhaust directs air away from work surface Equipped with silencer to reduce noise Precision air motor with exceptionally high turning force Precision ball bearings for longer life Can be used...

Rear exhaust directs air away from work surface Equipped with silencer to reduce noise Precision air motor with exceptionally high turning force Precision ball bearings for longer life Can be used for internal and external finishing Quick change belt replacement system Built-in speed regulator Reaches normally inaccessible areas Light weight ergonomic handle design for control and comfort Rubber grip for non-slip feel and insulates from cold air Grind off contact wheel or platen 360o head...

Availability: In Stock
Item #: VT4503 -

3/4" Air Belt Sander

Price: $344.57

Precision air motor with exceptionally high turning forceAnti-slip on drive drumCan be used for internal and external finishingQuick change belt replacement systemReaches normally inaccessible...

Precision air motor with exceptionally high turning forceAnti-slip on drive drumCan be used for internal and external finishingQuick change belt replacement systemReaches normally inaccessible areasLight weight ergonomic handle design for control and comfortRubber grip for non-slip feel and insulates from cold airGrind off contact wheel or platen360o head rotation provides versatility for every job

Availability: In Stock
Item #: VT2500 -

3/8" Air Impact Wrench

Price: $603.03

Twin hammer impact mechanism Lever throttle for easy operation Adjustable torque settings in forward or reverse One piece anvil is manufactured of alloy nickel chromium and molybdenum steel ...

Twin hammer impact mechanism Lever throttle for easy operation Adjustable torque settings in forward or reverse One piece anvil is manufactured of alloy nickel chromium and molybdenum steel

Availability: In Stock
Item #: VT4501 -

3/8" Air Belt Sander

Price: $190.34

Precision air motor with exceptionally high turning forceAnti-slip on drive drumCan be used for internal and external finishingQuick change belt replacement systemReaches normally inaccessible...

Precision air motor with exceptionally high turning forceAnti-slip on drive drumCan be used for internal and external finishingQuick change belt replacement systemReaches normally inaccessible areasLight weight ergonomic handle design for control and comfortRubber grip for non-slip feel and insulates from cold airGrind off contact wheel or platen360o head rotation provides versatility for every jobComes with 2 Belts - 1 80 Grit & 1 120 Grit ...

Availability: In Stock
Item #: VT1101 -

3/8" Mini Air Ratchet Wrench

Price: $132.88

Durable ratchet head provides up to 25 ft./lb. of torqueVariable speed throttle provides precise control of tool speedBall and needle bearing construction for long lifeCompact and lightweight ...

Durable ratchet head provides up to 25 ft./lb. of torqueVariable speed throttle provides precise control of tool speedBall and needle bearing construction for long lifeCompact and lightweight

Availability: In Stock
Item #: VT1001 -

3/8" Ratchet Wrench

Price: $89.04

Lever throttle for easy operation and enhanced speed controlGreat for hard-to-reach areasCombines speed and power for small applicationsLightweight and well balanced ...

Lever throttle for easy operation and enhanced speed controlGreat for hard-to-reach areasCombines speed and power for small applicationsLightweight and well balanced

Availability: In Stock
Item #: VT3105 -

5" Angle Air Grinder, W/5/8 - 11 Arbor

Price: $330.34

Availability: In Stock
Item #: VT3104 -

4" Angle Die Grinder, 3/8" Spindle Thread

Price: $321.13

Availability: In Stock
Item #: VT3000 -

1/2" Die Grinder

Price: $61.40

VT3000- 25,000 RPMAll ball bearing construction for longer tool lifeSelf-locking safety throttle lever to prevent accidental startsErgonomic positive gripRear exhaust ...

VT3000- 25,000 RPMAll ball bearing construction for longer tool lifeSelf-locking safety throttle lever to prevent accidental startsErgonomic positive gripRear exhaust

Availability: In Stock
Item #: VT3205 -

5" Angle Grinder, 10,500 RPM, 5/8 - 11

Price: $577.55

Industrial duty angle grinderHeavy duty cast constructionSpeed regulating valve maintains constant speed control and helps prevent over speedingVibration-dampening side assist handle for left or...

Industrial duty angle grinderHeavy duty cast constructionSpeed regulating valve maintains constant speed control and helps prevent over speedingVibration-dampening side assist handle for left or right hand operationLock off safety leverControlled variable throttle lever permits feather edging to full speed grindingCylinder is made of alloy steel, heat treated to HRC 58-60, surface ground for long life and maximum powerInternal gears are made of special alloy steel and heat treatedAdjustable...

Availability: In Stock
Item #: VT3400 -

Micro Die Grinder, 1/8 Collet Chuck

Price: $339.21

Twist throttle with variable speed controlHigh speedInternal surfaces precision groundSpecial heavy duty high speed bearingsIncludes 52” air hose and fittingsCylinder is made of special alloy steel,...

Twist throttle with variable speed controlHigh speedInternal surfaces precision groundSpecial heavy duty high speed bearingsIncludes 52” air hose and fittingsCylinder is made of special alloy steel, heat treated to HRC 50 degrees to 55 degrees

Availability: In Stock
Item #: VD5250J -

Die Grinder With Chuck

Price: $253.58

25,000 RPM vibration-free performanceFull 1/2 HP energy efficient motorFront exhaust design allows for additional assistance in clearing work area of chipsIn-line design allows for easy access to...

25,000 RPM vibration-free performanceFull 1/2 HP energy efficient motorFront exhaust design allows for additional assistance in clearing work area of chipsIn-line design allows for easy access to confined work areasAll machined parts are maintained to close tolerancesSteel body

Availability: In Stock
Item #: V100 -

Dual Straight Line Air Sander W/Shoe

Price: $346.55

Availability: In Stock
Item #: V101 -

Mini Straight Line Air Sander w/Shoe

Price: $411.01

Availability: In Stock
Item #: ST101 -

Mini Straight Line Air Sander

Price: $179.10

MiniVike is smaller for those hard-to-reach areasSmaller size reduces operator fatigue and also adapts well to all types of sanding needsVT101 has the Viking Quality with and economical quality ...

MiniVike is smaller for those hard-to-reach areasSmaller size reduces operator fatigue and also adapts well to all types of sanding needsVT101 has the Viking Quality with and economical quality

Availability: In Stock
Item #: VT200 -

6" Dual Action Sander With Pad

Price: $97.69

Balanced ball bearing constructionBuilt-in regulator for positive speed controlRandom orbital action provides superior swirl-free finishInsulated grip for added comfort ...

Balanced ball bearing constructionBuilt-in regulator for positive speed controlRandom orbital action provides superior swirl-free finishInsulated grip for added comfort

Availability: In Stock
Item #: VT4300 -

5" High Speed Sander

Price: $73.12

Built-in regulator adjusts speed to match various applicationsLightweight, compact design is easy to operate

Built-in regulator adjusts speed to match various applicationsLightweight, compact design is easy to operate

Availability: In Stock
Item #: VT6000 -

Medium Duty Air Hammer

Price: $73.52

Built-in regulator for pressure controlEasy touch trigger provides greater control and operator comfortStandard spring retainer for quick tool changesErgonomic design with elastomer handle grip for...

Built-in regulator for pressure controlEasy touch trigger provides greater control and operator comfortStandard spring retainer for quick tool changesErgonomic design with elastomer handle grip for improved comfort

Availability: In Stock
Item #: ST4308P -

7" Vertical Polisher

Price: $261.91

Availability: In Stock

Air Amplifier Drying System (complete Kit)

Price: $574.61

Availability: In Stock

Air Amplifier

Price: $124.72