Pull Plug Silicone Starter Kit

The kit includes 21 sizes ranging from 1/20" to 7/8" to cover the most common hole and bore sizes in powder coating and finishing work. Each plug has a tapered design that creates a tight seal in the hole. The variety lets you find the right fit for your specific parts before bulk ordering.

Pull plugs have an integrated pull tab that extends above the plug surface. After coating and curing, grab the tab and pull the plug straight out of the hole. Standard plugs require tools or fingernails to remove. Pull tabs save time on parts with many masked holes and reduce plug damage during removal.

Pull plugs are rated from 0 to 600F (315C), covering all standard powder coating cure temperatures with headroom. The silicone maintains its seal, flexibility, and shape through repeated cure cycles. The pull tab stays intact at cure temperature and does not melt or bond to the coating surface.

Yes. Pull plugs are designed for repeated use. The silicone resists coating adhesion, so cured powder typically flakes off the plug surface. Pull the plug out after each cycle, inspect for tears or deformation, and reuse on the next batch. Most plugs last many cycles before replacement is needed.

The Upgraded Pull Plug Silicone Starter Kit is priced at $85.00 (MPN SPPKI). Ships in stock from Creative Coating Solutions. Contains 21 different sizes of pull plugs fitting 1/20" to 7/8", rated to 600F for powder coating and finishing masking applications.