Non-Contact Infrared Thermometer, -4° F to 608° F

The thermometer measures from -4F to 608F, covering the full range of powder coating cure temperatures (typically 350-450F) plus freezer and cold-storage applications. The range is wide enough for most industrial surface temperature checks without needing a separate high-temp instrument.

The thermometer measures infrared energy emitted from a surface without touching it. Point the laser at the target surface and the sensor reads the temperature instantly on the LCD display. This allows safe measurement of hot surfaces like oven walls, cured parts, and heated equipment.

Yes. The 608F upper range covers standard powder coat cure temperatures of 350-450F. Use it to verify oven wall temperature, check part surface temperature after curing, and identify hot or cold spots inside the oven chamber. It supplements but does not replace the oven's built-in thermocouple.

The 12:1 distance-to-spot ratio means at 12 inches away, the thermometer reads a 1-inch diameter spot. At 24 inches, it reads a 2-inch spot. For accurate readings on small targets, measure from closer range. The laser pointer shows the center of the measurement area.

The Non-Contact Infrared Thermometer with -4F to 608F range is priced at $57.00 (SKU 318-IRT207). It ships in stock from Creative Coating Solutions. Includes backlit LCD, laser targeting, and instant-read capability for shop and industrial temperature measurement.