Blast Cabinet Dust Collector for Allsource Cabinets

This dust collector is designed for Allsource cabinets 41200, 41500, 41800, and 42000. These are the standard Allsource cabinet models from the benchtop to the walk-in Monster series. Verify your cabinet model number on the nameplate before ordering to confirm compatibility.

The dust collector provides 90 CFM of airflow to pull abrasive dust out of the blast cabinet during operation. This rate keeps the viewing window clear enough to see your work while blasting. Without adequate dust collection, visibility drops within seconds of blasting.

The unit runs on standard 110-120V household power at 60 Hz. It draws 1100W and 11.5 amps. Most shop circuits with a 15-amp breaker can handle this load, but avoid sharing the circuit with the blast cabinet compressor to prevent tripping the breaker during simultaneous operation.

Yes. The system includes both the motor and filter as a complete unit. The filter captures fine abrasive dust pulled from the cabinet interior. Check and clean the filter periodically based on usage. A clogged filter reduces CFM and causes visibility problems inside the cabinet.

The Blast Cabinet Dust Collector System for Allsource Cabinets is priced at $593.90. Ships from Creative Coating Solutions. Complete system with motor and filter, 90 CFM, 110-120V operation. Compatible with Allsource 41200, 41500, 41800, and 42000 cabinets.