4-1/4" Manual Throatless Shear | Baileigh Industrial

A standard bench shear has a fixed throat depth that limits how far material can be inserted, restricting you to straight edge cuts. A throatless shear has no back frame obstruction, so you can rotate the material freely during the cut. This allows curved cuts, irregular shapes, and full-panel interior cuts without repositioning.

The shear cuts mild steel sheet, flat bar, and angle iron within its rated capacity. The multi-purpose design handles different cross-sections without tooling changes. Aluminum and softer metals are cut well within the machine's rated range. Check the product specification sheet for maximum gauge and bar dimensions before ordering.

Yes - the throatless design is specifically for curved and contour cuts. Rotate the material as you cut to follow a layout line, creating arcs, circles, and compound curves that a conventional shear cannot produce. This is the primary advantage over bench shears for custom body panels and decorative metalwork.

This model mounts to a bench or stand. The mounting base includes bolt-down holes for rigid installation. A solid mounting surface is critical for accurate cuts - any movement during the cut produces irregular lines. Mount to a heavy steel workbench or a dedicated stand bolted to the floor for best results.

Keep the blade gap set correctly for the material thickness being cut. Too wide a gap produces a ragged edge and accelerates blade wear. Lubricate pivot points as specified in the maintenance schedule. Inspect blade edges for nicks after cutting hardened material. Resharpening or blade replacement restores cut quality when edges dull.